Skip to content

Free delivery and 30-day returns on every order. Shop the bag

Suits and garment bags

How to get wrinkles out of a suit (steam it anywhere)

Steam is the fastest fix. Here is how to steam a suit jacket and pants, use the hotel shower when you have no steamer, and iron wool without leaving a shine.

The fastest way to get wrinkles out of a suit is steam. Hang the suit on a shaped hanger, pass a handheld steamer over the fabric from top to bottom, then leave it on the hanger for about 15 minutes so the cloth dries in its new shape. If your hotel room has no steamer, a hot shower with the bathroom door closed does a slower version of the same job. An iron works too, but only on the wool setting and through a pressing cloth.

Below are seven fixes, ranked from the safest to the last resort, with separate steps for the suit jacket and the pants, a list of mistakes that damage wool, and a packing routine that leaves you less to steam on the next trip.

Suit on a hanger inside the opened PristineBag garment section, packed so there are fewer creases to get wrinkles out of later
A suit that travels hanging has fewer folds to steam out at the hotel.

How to get wrinkles out of a suit: the short version

  1. Read the care label. Wool, wool blends and most polyester suits take steam well. Linen creases deeply and needs more of it.
  2. Hang the suit jacket on a wide, shaped hanger and the pants by the hem on a clip hanger.
  3. Steam from the top down in slow strokes, holding the steamer just off the fabric.
  4. Let the suit hang and dry for 15 to 30 minutes before you put it on.
  5. Use an iron only for the trouser crease, on the wool setting, through a pressing cloth.

Steam relaxes the fibers so the weight of the fabric can pull the creases out. An iron flattens them with heat and pressure instead. That is why an iron works fast but can leave a shine on wool, and why steam is the first choice for a suit jacket.

Read the care label before you add heat

Before you try to get wrinkles out, check the care label. It tells you how much heat the suit can take. Under the FTC’s Care Labeling Rule, a label must give ironing instructions when a garment needs regular ironing, and it must warn against a method that would cause damage, such as “Do not iron” (FTC guidance on care labels). If your suit says “Do not iron”, stick to steam held away from the cloth or the shower method.

  • Wool and wool blends: the easiest suits to get wrinkles out of. Woolmark, the wool industry body, says wool fibers return to their natural shape after being bent, which gives wool a natural resistance to wrinkles (Woolmark wool care).
  • Linen and cotton: crease fast and deep. Expect to steam longer, and accept a few soft creases as part of the fabric.
  • Polyester and synthetic blends: steam well on a lower heat. A hot iron can leave shiny marks.
  • Velvet and fabrics with a pile: steam only. Pressing flattens the pile for good.

Fix 1: steam a suit with a handheld steamer

A handheld steamer is the best way to steam a suit. It adds heat and moisture without pressure, so it removes creases without flattening the cloth, the lapel roll or the shape built into the chest of the suit jacket. If you travel with suits often, a small travel steamer earns its space.

  1. Fill the steamer and let it heat fully. The first burst often spits water, so aim it at a towel first.
  2. Hang the suit jacket on a shaped hanger on a door hook or the shower rail, with the buttons undone.
  3. Hold the steamer head about an inch from the fabric, or let it touch very lightly, and move it slowly from the shoulders down.
  4. With your free hand, pull the fabric gently taut at the hem so the crease has something to straighten against.
  5. For stubborn creases at the elbows or the lower back, steam from the inside through the lining.
  6. Leave the suit on the hanger for at least 15 minutes. Damp wool creases again the moment you sit in it.

How to steam a suit jacket

Start with the back panel, where sitting and packing leave the biggest creases. Then do the sleeves: slide one hand inside and hold the sleeve out so the steam reaches the crease at the elbow. Finish with the front panels. Steam the lapels lightly and let them fall where they want to. Never press a lapel or a collar flat with the steamer head, because the soft roll of the lapel is part of how the suit jacket is cut.

How to steam suit pants

Clip the pants by the hem so they hang upside down. The weight of the waistband then helps pull the creases out of the legs. Steam each leg from the top down, front and back. If the pants have a pressed center crease, line up the inner and outer seams before you start so you don’t steam in a second crease next to the first.

Man carrying a travel bag with a suit packed inside for a work trip
Unpack the suit first when you arrive, before anything else.

Fix 2: turn the hotel bathroom into a steam room

No steamer, no problem: the shower can steam a suit for you. Woolmark recommends hanging wool pants in a steamy bathroom as a quick refresh that also removes creases (Woolmark on caring for wool pants). The same trick works on a suit jacket.

  1. Hang the suit on the shower rail or the back of the door, out of reach of the spray.
  2. Close the door and the window, and switch off the exhaust fan if the bathroom lets you.
  3. Run the shower as hot as it goes for about 10 minutes.
  4. Leave the suit in the steam for another 15 to 20 minutes, then smooth the creases with flat hands.
  5. Move it to the room and let it dry on the hanger before you wear it.

It is the gentlest way to get wrinkles out, and it works best on light creases and on wool. Deep folds from a tightly packed suitcase may need a second round. Do it the night before an event so the suit is fully dry by morning.

Fix 3: iron with a pressing cloth

An iron can get wrinkles out of the pants fast and restore a sharp trouser crease, but it is the method most likely to damage a suit. Woolmark advises the wool, medium or 2-dot heat setting, a little steam, and no heavy pressure, which can make the surface shiny (Woolmark on ironing wool).

  • Set the iron to the wool setting, or to whatever the care label allows.
  • Put a pressing cloth between the iron and the suit. A clean cotton handkerchief or a thin pillowcase works.
  • Press and lift. Sliding the iron back and forth stretches the cloth.
  • Iron the pants along the existing crease, one leg at a time, with the seams lined up.
  • Hang the piece right away so it cools in shape.

Keep the iron off the chest and lapels of the jacket. A suit jacket has canvas or fused interfacing inside that gives it shape, and an iron can flatten it or leave a mark. Steam the suit jacket and save the iron for the pants.

Fix 4: hang it overnight and let the fabric recover

To get wrinkles out after a short trip, hanging is often enough. Give the suit a wide hanger and space in the closet so nothing presses against it. A good wool suit often looks fine by morning, especially if you hung it in a steamy bathroom first.

Fix 5: the damp towel trick

Lay the pants or the suit jacket flat on the bed. Put a damp, not wet, towel over the creased area, press it down with your hands for a minute, then hang the piece to dry. It is slower than steam and only works on light creases, but it needs nothing beyond a hotel towel.

A wrinkle-release spray is another option. Test it on the inside of a hem first. If you pack it in a carry-on, TSA limits liquids to containers of 3.4 ounces (100 ml) or less (TSA liquids rule).

Fix 6: ask the hotel for pressing

Many business hotels offer a pressing service, and some lend irons or steamers. Ask when you check in, not on the morning of the meeting, because pressing often runs on a set schedule. It costs money, but a professional press is the safest choice for a suit jacket you care about.

Fix 7: a press-only visit to a dry cleaner

At home, or on a longer stay, a dry cleaner can press a suit without cleaning it. Ask for a press only. It saves the suit a cleaning cycle, and a pro press handles the jacket’s chest and lapels better than a hotel iron.

Mistakes that make a wrinkled suit worse

  • Ironing wool without a cloth. Direct heat and pressure can leave a permanent shine.
  • Putting the suit in a hot dryer. Unless the label allows tumble drying, heat and tumbling can shrink wool.
  • Wearing it damp. Damp fabric takes a new crease wherever you sit or bend.
  • Pressing the lapels flat. The roll of the lapel is cut and sewn in. Steam it, don’t flatten it.
  • Using a wire hanger for the suit jacket. A thin hanger puts dents in the shoulders that are harder to fix than the wrinkles.

How long each fix takes

Fix Rough time Best for Risk to the suit
Handheld steamer 10–15 min, plus drying Any suit, jacket and pants Low
Shower steam 30 min, plus drying Light creases, wool Low
Iron and pressing cloth About 15 min Trouser crease, deep folds in pants Shine or flattening if done wrong
Hang overnight 8 hours or more Light creases after a short trip None
Damp towel About 20 min, plus drying Small areas Water marks on some fabrics
Hotel pressing Ask at check-in Important meetings and events Low, costs money
Dry cleaner press Varies At home or long stays Low, costs money

These are rough times for one suit. Whichever way you steam a suit, add drying time before you wear it.

Pack the suit so there is less to get wrinkles out of

The easiest creases to fix are the ones that never form. A suit folded into a suitcase creases at every fold and wherever shoes or a laptop press on it. A suit that travels hanging, with nothing heavy on top, arrives with far fewer creases.

You have three good ways to pack it. You can fold the suit jacket inside out, as shown in our guide to folding a suit jacket for travel. You can roll the pants. Or you can hang the whole suit in a garment bag. Our step-by-step guide to packing a suit in a carry-on walks through all three, and the tips in packing clothes without wrinkles help with shirts too.

PristineBag Travel Duffel in black, closed, with gold-tone zips
The PristineBag Travel Duffel in Black.

We designed the PristineBag Travel Duffel around the third option. It opens flat into a garment bag with a hanging section for one suit: you hang the suit, fold the sides in and zip, and it closes into a duffel of about 42 L. Shoes go in a separate compartment, so they never sit on the suit. It won’t make a suit wrinkle-proof, and we have not run wrinkle tests, but a suit that hangs has fewer folds to steam out.

One honest caveat: packed full, the bag is 10 in (25 cm) deep. Delta’s carry-on limit is 22 × 14 × 9 in (Delta carry-on rules, checked November 2026), and most large US airlines use the same size, so a full bag is about 1 in over on depth. Check your flight with our carry-on size checker before you go.

A ten-minute routine when you arrive

  1. Unpack the suit first, before you open anything else.
  2. Hang the jacket on a shaped hanger and the pants by the hem.
  3. Take a hot shower with the suit hanging in the bathroom.
  4. Move the suit to the closet with space around it and let it dry overnight.
  5. In the morning, steam any crease that’s left and touch up the trouser crease if you need to.

On a two-day trip, that routine is usually all a wool suit needs. Linen and cotton suits will still show some creases, which is normal for those fabrics.

Beige PristineBag duffel on a table next to green plants
Unpack, hang, shower: the routine takes about ten minutes of your time.

Suit wrinkle questions

Should I steam a suit or iron it?

Steam the jacket and iron only the pants. Steam removes creases without pressure, so it keeps the shape of the suit jacket. An iron is useful for a sharp trouser crease, on the wool setting and through a pressing cloth.

How do I get wrinkles out of a suit without a steamer or an iron?

Hang it in the bathroom while you run a hot shower with the door closed, then let it dry on a hanger. For a small crease, press a damp towel over it and hang the piece again. Hanging overnight also helps a wool suit recover.

Can I use a hair dryer on a wrinkled suit?

A hair dryer adds heat but no moisture, so on its own it does little. Misting the crease lightly with water and drying it from a distance helps a bit, but the shower method works better and carries less risk of heat damage.

How long does it take to steam a suit?

With a handheld steamer, about 10 to 15 minutes for the jacket and the pants, plus at least 15 minutes of drying on the hanger. Plan for 30 minutes in total before you get dressed.